CUSTOMER CARE +39 011 2730000

Amse

Melt Flow Indexer

AMSE offers a complete range of instrument to measure the polymers melt index.

AMSE Charpy and Izod Impact tester

AMSE offers a complete range of instruments for polymer testing according to Charpy and Izod methods.

Thermal measurement HDT Vicat

AMSE offers a complete range of instrument for the determination of polymers HDT and Vicat temperatures according to ISO 75, ISO 306, ASTM D648, ASTM D1525 and other equivalent.

AMSE Automatic Notching Machine

This type of equipment is used to notch polymer samples to be used for both Charpy and Izod impact tests.

AMSE Manual Notching Machine

This type of equipment is used to notch polymer samples for Charpy and Izod impact tests.

Notching depth measure instrument

The  device can be connected to a PC via RS232 for measurements reporting.

Specimen Maker

The equipment consist in a motorized milling machine and a series of templates to reproduce the required  specimen’s shape.

Environmental Stress Cracking (ESCR)

Environmental Stress Cracking is the main breakage cause of  plastic components.

AMSE Ball Drop Tester XJB-30

AMSE Ball Drop is compliant with the method described in ISO 7765-85,ASTM D1709 and other equivalents.

Apparent density

The instrument is used to determine the apparent density of granules and powders. It is suitable for quality control of raw materials.

 

Full Notch Creep Tester Mod. XQB

Instrument is used to determine the resistance of polyethylene samples according to the standards ISO 16770, ISO 899, ISO 3501 and other equivalents.

AMSE HPT Hydrostatic Pressure Tester

AMSE offers a complete system for resistance determination of hydrostatic pressure on thermoplastic pipes and fittings.

International reference standards: ISO 1167, EN 921, ASTM D 1598, ASTM D 1599 and other equivalents.

Ring Stiffness Tester

System used to evaluate radial stiffness of clips from plastic pipes with a circular cross section.

Rapid Crack Propagation

System used to determine critical pressure and temperature of the crack propagation on plastic pipes.

Pipe opacity

The machine is used to determine the opacity of pipes and fittings according to international standards ISO 7686 and other equivalents.

Falling weight Impact tester mod. FWI-111

The system is used to determine the impact strength of plastic pipes with circular cross section.

Thermal cycling tester

The system is used to determine the breakage of plastic pipes and fittings subjected to a specified internal pressure.

Pipe Cutting

The system is used to cutting and smoothing plastic pipes. Its strong structure allows processing of a wide range of pipes. All process are fully synchronized, allowing to optimize working time.

Pipe tester mod. B50

Used to determine the impact strength of plastic pipes with circular cross section.

AMSE Impact tester

The AMSE JBW series Charpy impact tester comply with all international standard:ISO 148, ASTM E23, EN 10045, GB/T3038-2002  and GB/T229-1994.

AMSE S.r.l.

Strada della Cebrosa 86
10156 Turin (TO) – Italy

Telephone: +39 011 2730000
Fax: +39 011 2740458
E-mail: info@amse.it

Helpful Information

CUSTOMER SERVICE

  • +39 011 2730000
  • info@amse.it

 

©2020 AMSE S.R.L. Partita Iva 09762820018 – SDI A4707H7 – S.C.I.A. 00028661 del 21/09/2020 – C.C.I.A.A. di Torino – REA TO-1078594 – Privacy policyCookie Policy

Amse